Contact Us

Wood Pellet

Wood and Biomass

Wood pellet line is the process of making wood waste into solid fuels which are used for burning purposes. Wood Pellet is generally made from compacted sawdust and related industrial wastes from the milling of lumber, manufacture of wood products and furniture, and construction.
IDAH offers complete process solutions and consultancy that will help you integrate smoothly into the wood pellet business. In producing wood pellets, there are some important variables that we need to pay attention to, such as raw material purity, moisture content, particle size, and pellet strength.

Pellet mill for wood pelleting

Raw Material

The raw material for wood pellets may differ according to the source. It may come in a log shape, board shape, sawdust, and many other. A pre-crushing may be needed to reduce particle material size

15 Dec(你看不見,這個理論上可以不要加)

Pre-grinding

Optional step for coarse material.
Pre-grinding will lower the energy needed for post-grinding.

Daily Tank Storage

Daily tank storage will contain the material needed for production that day.

Dosing and Weighing

The material will be dosed based on the formula.

Post-grinding (optional)

Post-grinding is the final size reduction in the system.
This step can be omitted if not necessary.

Mixing

In this step, some water, oil, or other liquid may be added to help the pelleting process.

Pelleting

Pelleting starts with pre-conditioning, adding steam to further hydrate, and cook the material before entering the pelleting chamber to be formed into pellets.

Cooling

Cooling utilizes ambient air to cool down the hot pellet from the pellet mill.
Thorough cooling is needed to prevent condensation inside the packaging.

Packing

Packing gives protection to the pellets and also give easiness to handle and transport to customer's hand

Sawdust in the flat storage

Pelleting process description for wood pellet

Pre-crusher system Some materials will have big dimensions, so this pre-crushing is needed to reduce the size.
Raw material intake system Consisting of tip hopper, mechanical conveyors, and elevators into storage bins. For wood pellet, the material can be sawdust, straw meal, and other biomass sources.
Grinding system A size reduction process for raw materials that contain large particulates. The ground material is conveyed to storage bins. (Location for this grinding system can be designed to suit the process flow that follows).
Mixing system Other sources like liquid and oil are now added and mixed with raw material in batches. After mixing the material is ready for pelleting.
Pelleting with Pre-conditioning The mixer feeds down through a feed hopper into the feed screws which meter the ingredients into the conditioner. Due to its nature, biomass material will have low flowability. A force feeder is needed to feed the material to the pelleting chamber. IDAH's pellet mill produces pellets at high capacity, low energy consumption, and high pellets quality. With a special die and rolls design, the production cost can be reduced to a minimum. Rolls combination is designed for easy adjusting the clearance between the rolls and the die. With different raw materials, appropriate clearance will help rolls work and achieve the maximum capacity. Sizes of pellets are controlled by hole diameters of pellet dies and the compression ratio of the die is crucial to the high quality of pellets and production throughput.
Cooling

After the pelletizing process, the wood pellet is hot. Cooler lowers the temperature of the hot pellets to ±5 °C of room temperature and reduces the moisture by using ambient air. Cooling would extend the shelf life of the wood pellet.

Impurity and dust sieve

All pellets will go through a vibration sieve to remove any irregular pellets or dust.

Bagging and sealing system

Weighing cell and bagging machines put pellets into bags with chosen quantity and seal the bags for storage. Finished products can also be loaded by trucks or in container bags.

Wood pellets close up

Features and Benefits of IDAH Process Design and Equipment

IDAH firmly believes in a strategy of design fit for purpose. We recognize the constraints our customers face with rising ingredient costs, energy costs, and overheads costs, yet in the face of these challenges, it is still expected that high-quality products be supplied into a very competitive market. Our design philosophy is to work continuously to refine and improve processes and equipment to maximize the success of our customers. The following describes some of the features and benefits resulting from this philosophy.

Rugged 24/7 Design

We design our equipment for continuous operations and fulfill the expectation for minimal downtime. Our mission is to see our equipment still working years after installation, with only maintenance required being routine maintenance caused by normal fair wear and tear.

Formulation

Two perspectives are influencing the formulation: culturing performances and efficiency of the machinery. For example, choose the right wood source is essential. Inappropriate wood sources will lower the steam incorporation level and causes jams at the pellet mills. Fat and moisture content play inseparable roles in the hammer mill throughput.

Pre-conditioning

The independent drive on each shaft of the IDAH twin shaft lowers power consumption and noise. The paddles' reverse rotation allows completely emptying the chamber. The misting steam and water injectors further improve conditioner performance. The following conditioner system used steam jacketed (or heat jacketed) to create a homogenous mix with little to no free water. Insufficient pre-conditioning will cause cracks on the pellet surface and creating dust fines.

Cooling

The counterflow cooler is used for cooling pellet and extrudate. Warm (hot) pellets get into the cooling chamber, the suction fan will transport out the air inside the chamber, and fresh ambient air will enter the chamber from the bottom, promoting pellet cooling action. When pellets are accumulated and touch the high-level limit sensor, a pneumatic discharge swivel valve will operate immediately to discharge the products. Counterflow air heat exchange ensures to achieve high cooling efficiency.

Wood pellet factory



Specification of Pellet Mills (for Wood Pellets)

Model PM-42RB PM-53RB PM-635RB
Main Motor (HP) 150 250 350
Operation Capacity1 (t/h) 0.4-0.6 1.3-1.5 1.8-2.0

Note:

1) Wood Pellets, pellet die hole size Ø 8.0 mm, moisture content < 12%, oil content <7%

Share
Back


Hi, what are you looking for?